ROVERjet Specification
Tracks -
width open 44 "
Width closed 22 "
Length 72"
Weight 1260 lbs.
Cannon –Hydraulic powered full cannon with full camera + lighting and
screen wash system (as per manway cannon specification)
Umbilical –250 ft fully sheathed umbilical 4" dia containing all
hydraulic and electrical services for tracked vehicle and cannon.
Insertion Ramp –Hydraulically operated insertion ramp to enable machine to enter
tank and open up to the operating position without man entry.
Manway & Roverjet Cannon camera and light Specification.
General: Pan 340 degrees
Tilt 170 degrees
Hydraulic drive X 2
Fluid sealing to 1500 psi max
Camera: Low light (0.1 lux)
Auto Iris
Auto Focus
Zoom 12:1 + 4X Digital
Camera Housing: NEC Class1 Div1 Groups B,C&D
Light 110v HPS 100w 9600 bare lamp lumens
Class 1 Division 1 Groups C&D
Connections Class 1 Division 1 Group C&D plug
and socket for umbilical connection
Nozzle specifications
Nozzle Naval brass with stream straighteners incorporated
Nozzle data in US Gal/min as follows:-
|
Supply
Pressure
PSI |
Typical Nozzle Diameter |
|
5/8" |
3/4" |
7/8" |
1" |
|
Flow
GPM |
(ft) Jet Length |
Flow
GPM |
(ft) Jet Length |
Flow
GPM |
(ft) Jet Length |
Flow
GPM |
(ft) Jet Length |
|
120 |
129 |
72 |
162 |
84 |
226 |
90 |
290 |
95 |
|
150 |
149 |
81 |
184 |
100 |
248 |
100 |
319 |
105 |
|
175 |
158 |
84 |
193 |
110 |
257 |
105 |
334 |
110 |
7/8 and ¾ nozzles are supplied with unit
Manway Cannon additional specifications
Adapter Adjustable for 24 , 30 and 36" manways
Hydraulic Power Pack for powering of Roverjet System &
Centrifugal Pump Specification
Engine- Iveco 8061 6 cyl diesel water cooled
Power(intermittent)-84.5KW@2500rpm
Power(continuous) -76 KW@ 2500rpm
Displacement 5.9 l - 12v electrics
Fitted with splitter box for 1 X tandem pumps + 240v 3 phase
generator 5.6 KW
Pump No.1 for the cannon feed pump & lobe pump - Plunger
type pilot operated with variable displacement 150 l/min 250 bar
Pump No.2 for the ROVERjet + Manway cannon - Plunger type
pilot operated with variable displacement 50 l/min 250 bar
Mounting Protection Frame with lifting point
Oil Cooler 7.5 KW
Pressure line filtration 10 micron abs.
Fuel and Hydraulic Tanks- incorporated
Full instrumentation and controls fitted
Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection
Cannon feed pump specification
Drive: Hydraulic Motor powered from ROVERjet Power pack
Pump: 4 x 3 - 13 inch centrifugal pump3600rpm Viton/Tungsten carbide seals
Max Flow: 250 USG/m
Max Pressure: 250 psi
Inlet: 4"
Outlet: 3"
Unit Skid mounted: 1600mm X 1000 X 1100
Weight: 1650kgs
