|
Technical Specifications
NES
COMBI TANK CLEANING Kit
Moverjet vehicle
- Track width :230mm
- Track height :330mm
- Total width assembled :1105mm
- Total length with blade :2420mm
- Number of assemblies for passing manway :11
- Total weight assembled :550kgs
- Drive :2 hydraulic motors with integral gearboxes
- Controls :Remote joystick in control room
- Tracks :Continuous Nitrile rubber self tensioning
- Suction: Bill type suction with hydraulic raise lower
- Pump: On board NES670 rotary lobe pump controlled from console
- Assembly fixings :Pins/slot-in/quick release couplings
- Speed :Variable 0 to 40m/min
Moverjet and Manway Cannon
Cannon –Hydraulic powered cannon with camera + lighting and twin screen wash system
Umbilical –80 meters fully sheathed umbilical all hydraulic and
electrical services for Moverjet and cannon.
Camera and light Specification.
General: Pan 340 degrees
Tilt 170 degrees
Hydraulic drive X 2
Fluid sealing to 1500 psi max
Camera: Low light (0.1 lux)
Auto Iris
Auto Focus
Zoom 12:1 + 4X Digital
Camera Housing: NEC Class1 Div1 Groups B,C&D
Light 110v HPS 100w 9600 bare lamp lumens
Class 1 Division 1 Groups C&D
Connections Class 1 Division 1 Group C&D plug and
socket for umbilical connection
Nozzle specifications
Nozzle Naval brass with stream straighteners incorporated
Nozzle data in US Gal/min as follows:-
|
Supply
Pressure
PSI |
Typical Nozzle Diameter |
|
5/8" |
3/4" |
7/8" |
1" |
|
Flow
GPM |
(ft) Jet Length |
Flow
GPM |
(ft) Jet Length |
Flow
GPM |
(ft) Jet Length |
Flow
GPM |
(ft) Jet Length |
|
120 |
129 |
72 |
162 |
84 |
226 |
90 |
290 |
95 |
|
150 |
149 |
81 |
184 |
100 |
248 |
100 |
319 |
105 |
|
175 |
158 |
84 |
193 |
110 |
257 |
105 |
334 |
110 |
7/8 and ¾ nozzles are supplied with unit
Manway Cannon additional specifications
Adapter Adjustable for 24 , 30 and 36" manways
|
NESL 640-140 Lobe Pump |
NESL 670-270 Lobe Pump |
|
Max Flow-84m3/h Max Pressure 6.2 Bar |
Max Flow-162m3/h Max Pressure 6.3 Bar |
|
Suction inlet-4"/100mm Discharge-4"/100mm |
Suction inlet-6"/150mm Discharge-6"/150mm |
|
Drive-Hydraulic Motor Max Speed 540RPM |
Drive-Hydraulic Motor Max Speed 540RPM |
|
Mounting-on board Moverjet |
Mounting-4 wheeled trolley |
|
Control- remote |
Control- Hydraulic valve Forward/Reverse/Stop |
|
Dimensions-720 X 274 X 463 Weight 154Kgs |
Dimensions-873 X 274 X 463 Weight 194Kgs |
|
Number of Lobes-4 Materiel-Nitrile Rubber |
Number of Lobes-8 Materiel-Nitrile Rubber |
|
NES 501 Cavity Screw Pump |
| Mounting: steel frame |
| Pump:Helical screw cavity |
| Stator:Nitrile |
| Drive: Hydraulic |
| Inlet:6" |
| Outlet:6" |
| Pressure:10bar Flow:60m3/hour |
|
NES502A Hydraulic driven centrifugal
pump |
| Mounting:steel frame |
| Pump: two stage centrifugal |
| Drive: Volvo F12 hydraulic motor |
| Flow: 250 USG/Minute |
| Pressure:250 psi |
| Inlet: 3" |
| Outlet: 2" |
|
NESL 402A Hydraulic Power Pack |
|
Engine- Iveco 804I 4 cyl diesel water cooled |
|
Power(intermittent)-56KW@2500rpm |
|
Power(continuous) -50.5KW@2500rpm |
|
Displacement 3.9 l - 12v electrics |
|
Pump- 134 l/m @ 250 Bar |
|
Mounting Protection Frame with lifting point |
|
Fuel and Hydraulic Tanks- incorporated |
|
Full instrumentation and controls fitted |
|
Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection |
|
Use- NES502A / NES501 |
|
NESL 402C Triple Hydraulic Power Pack |
NESL 405A Mobile Hose Reel |
|
Engine- Iveco 8065Si 6 cyl turbo diesel water cooled |
Number of reels 2 (1-supply to Mover (in sit and ride mode) 2- supply
to Lobe pump) |
|
Power(intermittent)-119.5KW@2500rpm |
All steel construction frame with lifting point |
|
Power(continuous) - 104KW@2500rpm .max125KW |
Length of Umbilicals 300 feet fully sheathed with QR couplings
including air line for Mover operator |
| Generator:belt driven from
engine 12.5kva 400/230v |
|
Displacement 5.9 l - 12v electrics |
Extension hoses to Power pack 2 X 50 feet with QR couplings |
|
Pump- 223 l/m @ 250 Bar Variable displacement on demand pressure
compensated |
|
Mounting:inside acoustic power house |
|
Fuel and Hydraulic Tanks- in central container room |
|
Full instrumentation and controls fitted in control room |
|
Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection |
|
Use-NES Moverjet/NES640/NES Manway Cannon |
The above are all standard NES package Kits, any special
requirements are not included. For special requirements details should be given
to our technical sales department for evaluation and costing.
Specifications are liable to changes without notice
| 